BLOG

What is House-side Shield

Horace He

Last Updated: December 26, 2023

What is House-side Shield

A house-side shield is a device or component specifically designed to address the issue of unwanted light spillage onto private property behind a streetlight. It is typically installed on the side of the streetlight that faces residential properties or homes. The primary purpose of a house-side shield is to minimize light glare and ensure the safety of residents while still allowing the light from the streetlight to be visible from their homes.

The decision to install a house-side shield is typically made by relevant authorities, such as the Portland Bureau of Transportation (PBOT) Signals and Street Lighting (SSL) team, who evaluate its effectiveness in reducing unwanted light and maintaining safety. If approved, an electrician is usually requested to install the house-side shield as a courtesy.

Get Inspired by Rayzeek Motion Sensor Portfolios.

Doesn't find what you want? Don't worry. There are always alternate ways to solve your problems. Maybe one of our portfolios can help.

The house-side shield serves as a means to control the direction of light emitted by the streetlight, preventing it from directly entering residential windows or causing unnecessary light pollution. By effectively redirecting or reducing the light spill behind the pole, the house-side shield helps to create a more comfortable and visually appealing environment for residents.

Maybe You Are Interested In

  • Load Current: 10A Max
  • Auto/Sleep Mode
  • Time delay: 90s, 5min, 10min, 30min, 60min
  • Load Current: 10A Max
  • Auto/Sleep Mode
  • Time delay: 90s, 5min, 10min, 30min, 60min
  • Load Current: 10A Max
  • Auto/Sleep Mode
  • Time delay: 90s, 5min, 10min, 30min, 60min
  • Load Current: 10A Max
  • Auto/Sleep Mode
  • Time delay: 90s, 5min, 10min, 30min, 60min
  • Load Current: 10A Max
  • Auto/Sleep Mode
  • Time delay: 90s, 5min, 10min, 30min, 60min
  • Load Current: 10A Max
  • Auto/Sleep Mode
  • Time delay: 90s, 5min, 10min, 30min, 60min
  • Occupancy mode
  • 100V ~ 265V, 5A
  • Neutral Wire Required
  • 1600 sq ft
  • Voltage: DC 12v/24v
  • Mode: Auto/ON/OFF
  • Time Delay: 15s~900s
  • Dimming: 20%~100%
  • Occupancy, Vacancy, ON/OFF mode
  • 100~265V, 5A
  • Neutral Wire Required
  • Fits the UK Square backbox
  • Voltage: DC 12V
  • Length: 2.5M/6M
  • Color Temperature: Warm/Cold White
  • Voltage: DC 12V
  • Length: 2.5M/6M
  • Color Temperature: Warm/Cool White
  • Voltage: DC 12V
  • Length: 2.5M/6M
  • Color Temperature: Warm/Cool White
  • Voltage: DC 12V
  • Length: 2.5M/6M
  • Color Temperature: Warm/Cold White
rz036 occupancy sensor switch ceiling mounted
  • Occupancy mode
  • 12V ~ 24V, 5A
  • Neutral Wire Required
  • 1600 sq ft
  • Voltage: DC 12v/24v
  • Day/Night Mode
  • Time delay: 15min, 30min, 1h(default), 2h
  • Occupancy, Vacancy, ON/OFF mode
  • 100~265V 5A
  • Neutral Wire Required
  • Fits the US 1-Gang wall box
  • Occupancy, Vacancy, ON/OFF mode
  • 100~265V, 5A
  • Neutral Wire Required
  • Fits the US 1-Gang wall box
  • Occupancy, Vacancy, ON/OFF mode
  • 100~265V, 5A
  • Neutral Wire Required
  • Fits the European round backbox
rz021 us occupancy vacancy sensor switch front
  • Occupancy, Vacancy, ON/OFF mode
  • 100~265V, 5A
  • Requires Hot wire, Load wire
  • No Neutral/Ground Wire Required
  • Fits the US 1-Gang wall box
rz023 uk occupancy vacancy sensor switch front
  • Occupancy, Vacancy, ON/OFF mode
  • 100~265V, 5A
  • No Neutral/Ground Wire Required
  • Fits the UK square pattress box

Frequently Asked Questions

What Does a Light Shield Do

The light shield serves as a protective barrier that prevents the outdoor LED Parking Lot light or led wall light from emitting rays in unwanted directions. It effectively blocks the light from trespassing and can be adjusted to restrict the direction of the outdoor light.

What Is a Street Light Shield

A street light shield refers to a protective barrier installed on the side of a house facing the light. Its purpose is to reduce the amount of unwanted light that spills onto private property located behind the light. The evaluation of shield requests is carried out by a member of the Portland Bureau of Transportation (PBOT) Signals and Street Lighting (SSL) team.

How Do You Get a Street Light Shield

Shields for streetlights can be obtained from various streetlight manufacturers, despite the possibility of your local utility discouraging it. It is important to remain persistent in your request, as you did not request for your yard or home to be illuminated.

Why Do Traffic Lights Have Shields

“The shields serve multiple purposes: 1) enhancing the visibility of the lights for drivers approaching them; 2) minimizing glare caused by external light sources like the sun; and 3) preventing drivers on nearby streets from being distracted by conflicting traffic movements,” she explained.

What to Do if Neighbors Lights Too Bright

Jody Prunier, associate director of California Lawyers for the Arts, a legal and mediation service, suggests that you could consider approaching your neighbors directly by knocking on their door, calling or emailing them, or even sending a letter to express your concerns about the excessive brightness of their lights and request a discussion.

Is It Illegal to Shine a Light in Someone’s Window

Like noise pollution, courts in most parts of the United States consider shining a light in someone’s window as a form of “nuisance”. A nuisance refers to any behavior that disrupts a neighbor’s ability to use or enjoy their property.

Do Street Lights Cause Light Pollution

Millions of street lights in our cities emit light that is not fully utilized for illuminating streets or sidewalks. Instead, a significant portion of this light is lost and emitted above the horizon, resulting in the brightening of the night sky. This phenomenon is commonly referred to as light pollution.

Leave a Comment

en_USEnglish