Be the first to review “Wireless Occupancy Sensor Switch Kit (RZ036A+RZ023WG)” Cancel reply
Wireless Occupancy Sensor Switch Kit (RZ036A+RZ023WG)
RZ036A+RZ023WG
The RZ036A motion detectors are equipped with an integrated wireless module, incorporate wireless technology and motion sensing capabilities for wireless communication and motion sensing capabilities. When paired with the RZ023WG wireless sensor, these two devices work in tandem to provide an extended range for motion detection, ensuring reliable lighting control. Particularly useful in narrow corridors, stairs and some large spaces.
RZ036A: Occupancy Sensor Switch
The RZ036A motion detectors are equipped with an integrated wireless module, incorporate wireless technology and motion sensing capabilities for wireless communication and motion sensing capabilities. When paired with the RZ023WG wireless sensor, these two devices work in tandem to provide an extended range for motion detection, ensuring reliable lighting control. Particularly useful in narrow corridors, stairs and some large spaces.
RZ023WG: Wireless Occupancy Sensor
The RZ023WG Wireless occupancy sensor powered by 2 AAA batteries and is equipped with a wireless module. Its primary function is to detect motion and communicate with the main control sensor (RZ036A). When motion is detected, the sensor sends a signal to the control sensor (RZ036A) to switch on or maintain the light. If neither sensor detects any movement within the user-set time period, the controller sensor (RZ036A) will determine that the space is unoccupied and switch off the light. The RZ023WG Wireless occupancy sensor can be installed in areas where wiring installation would be difficult or impossible, resulting in a significant reduction in labor and installation costs. Moreover, its wireless nature allows for future flexibility as it can be easily moved to accommodate changes in room usage or configuration.Pairing
Transmitter(RZ023WG): the device powered by battery
Receiver(RZ036A): the device connected to mains power
Add New Pairings
- To prevent battery interference, firstly remove the battery from the transmitter or turn it back to people, there should be no other transmitters working nearby.
- Press and hold the big button of the receiver, the red indicator will flash 1-6 times, and then release the big button after the indicator light stays on, new parings can be added at least 10 sets.
- Install the battery on the transmitter and wait for 2-3 seconds, short press the big button of the transmitter, the learning will be successful after the indicator light flashes and goes out.
Delete Existing Pairings
- To prevent battery interference, firstly remove the battery from the transmitter or turn it back to people, there should be no other transmitters working nearby.
- Press and hold the small button of the receiver, the red indicator flash 1-3 times, and then release the small button after the indicator light stays on, it will erase the existing pairings.
- Install the battery on the transmitter and wait for 2-3 seconds, short press the big button of the transmitter, the learning will be successful after the indicator light flashes and goes out36
Features, Benefits, Specs
The RZ036 ceiling occupancy sensor is a universal ceiling mount motion sensor solution optimal for almost every residential and commercial application.
Features & Benefits
- Advanced PIR technology with one built-in detector for accurate and high sensitivity performance.
- Made of high-security fireproof material.
- The built-in magnetic latching relay offers better performance compared to a traditional relay.
- Adjustable time delay setting from 15s, 30s, 1min, 3mins, 5mins, 10mins, to 30mins.
- Adjustable light sensor value from OFF, 15 Lux, 25 Lux, to 35 Lux
- Adjustable sensitivity setting(detection range) from low to high.
- FCC, CE, RoHS certified.
Specifications
RZ036A
- Features
-
Sensor Mode
Occupancy mode, Occupancy without light sensor mode
Time-Delay
15 s, 30s, 1 min(default), 3 min, 5 min, 10 min, 30 min
Light Sensor
Off, 15 Lux, 25 Lux (default), 35 Lux
Sensor Sensitivity
Low Sensitivity, High Sensitivity
- Working Conditions
-
Power Source
110 VAC ~ 265 VAC
Power Frequency
50 / 60Hz
Installation Height
2.6 m ~ 3.5 m
Working Humidity
< 93%RH
Working Temperature
-10 ~ +40℃
- Detection Capability
-
Detection Distance
12 m ~ 18 m (<27℃)
Detection Range
360°
Detection Speed
0.6 ~ 1.5m/s
- Bulb Compatibility
-
Fluorescent / Ballast / LED
500 W / 220 VAC
Incandescent / Halogen
1100 W / 220 VAC
RZ023WG
- Features
-
Sensor Mode
Vacancy mode, Occupancy mode, Manual ON/OFF mode
Time-Delay
15 s, 1 min(default), 3 mins, 5 mins, 15 mins, 30 mins
Light Sensor
Off, 15 Lux, 25 Lux (default), 35 Lux
Sensor Sensitivity
Low Sensitivity, High Sensitivity
- Working Conditions
-
Power Source
2pcs*AAA battery
Installation Height
1 m ~ 1.6 m
Working Humidity
< 93%RH
Working Temperature
-20 ~ +40℃
Communication range
12-20Meters,suggest distance between RZ036A and RZ023WG not more than 12meter
- Detection Capability
-
Detection Distance
6-9m max(<24℃)
Detection Range
< 150°
Detection Speed
0.6 ~ 1.5m/s
Versatile Applications
The RZ036 is the ideal ceiling-mounted occupancy sensor solution for 100V ~265V home applications and commercial projects. Perfect for frequently visited spaces, such as public bathrooms, hallways, garages, open offices, breakrooms, stairwells, or corridors.
Bathroom
Auto-ON/Auto-OFF occupancy sensor is the ideal working mode for bathroom usage, especially when you use it at night.
Garage
Walk in and walk out of your garage without the need to reach the light switch with an occupancy sensor. Enable daylight sensing to save more energy in the day.
Laundry Room
Say goodbye to reaching the light switch ever again when arm-full with piles of laundry to wash or clean clothes.
Kitchen
Place an occupancy sensor switch at the entrance and enjoy the automatic lighting while cooking and preparing food.
Hallway
Occupancy/vacancy sensor switches can reduce the hours of lighting use by approximately 53% on dark hallways in your basement.
Breakroom
Occupancy sensors can reduce energy waste by 39% and increase energy-saving up to 17% with a 20-minute time delay for break rooms.
Private Office
Rayzeek occupancy vacancy motion sensor switches provide max flexibility for office use cases. Your office, your call.
Conference Room
Vacancy switch with manual override feature is perfect for applications like conference rooms where it’s not frequently used and requires manual turn on.
Videos
Play Video
RZ036 Installation
Play Video
RZ036 User Guide
Resources
Expand Your Motion Sensors
View all our energy-saving products with motion sensors
Reviews
You may also like…
-
Rayzeek Occupancy Motion Sensor Light Switch, 5A, US, No Neutral Required
RZ021-5A-G- Occupancy, Vacancy, ON/OFF mode
- 100~265V, 5A
- Ground Wire Required
- Fits the US 1-Gang wall box
-
Rayzeek Occupancy Motion Sensor Light Switch, 5A, EU
RZ022-5A- Occupancy, Vacancy, ON/OFF mode
- 100~265V, 5A
- Neutral Wire Required
- Fits the European round backbox
-
Rayzeek Occupancy Motion Sensor Light Switch, 5A, UK
RZ023-5A- Occupancy, Vacancy, ON/OFF mode
- 100~265V, 5A
- Neutral Wire Required
- Fits the UK square pattress box
-
Ceiling Mount Occupancy Sensor, PIR with Light Sensor, Line Voltage, 10A
RZ036-10A- Occupancy mode
- 100~265V, 10A
- Neutral Wire Required
- 1600 sq ft
English 
German 
French 
Reviews
There are no reviews yet.