Rayzeek Occupancy Motion Sensor Light Switch, 5A, US, Neutral Required
The RZ020-5A-N motion sensor light switch uses an advanced passive infrared (PIR) motion sensor to detect people in the sensor zone and integrates a photocell for daylight sensing. Users can adjust the configuration by simply pressing the two push buttons on the panel without uncovering the wallplate. Besides occupancy and vacancy mode, the RZ020 series motion sensor switch introduces an innovative manual ON/OFF mode allowing the sensor switch to be used the same as a manual wall switch so that users can have manual override and keep the light always ON/OFF as long as needed. The RZ020 series is a direct replacement for the US standard 1-Gang wall switches. A neutral wire is required for RZ020-5A-N.
- VERSATILE SENSOR MODE: Occupancy(Auto-ON, Auto-OFF), Vacancy(Manual-ON, Auto-OFF), Manual ON/OFF(Manual-ON, Manual-OFF)
- BROAD VOLTAGE: Applicable for 110V residential and 277V commercial voltage in the US.
- FLEXIBLE WIRING: Hot wire, Load wire, Neutral wire and Ground wire. (Can be installed without a neutral wire with RZ020-5A-N)
- EASY INSTALLATION: Fit in the US standard 1-Gang wall box
Motion Sensor Light Switch
It’s never too late to experience convenient, energy-saving, and hands-free motion-activated lighting. Easily save up to 60% of energy and reduce your electricity bills with a simple upgrade to motion sensor light switches.
The versatile RZ020 motion sensor switch is applicable for every residential and commercial application with occupancy, vacancy, and ON/OFF modes integrated for max compatibility, flexibility, and ease of use.
Versatile 3-In-1 Sensor ModeRZ020 motion sensor light switch utilizes PIR(passive infrared) technology with advanced microcontrollers for superior motion detection sensitivity and performance. RZ020 sensor switch includes three working modes:
- Occupancy Mode: The light automatically turns on and off by the motion sensor. (Auto-on/Auto-off Mode)
- Vacancy Mode: Press the button to manually turn on the light and the light automatically turns off. (Manual-on/Auto-off Mode)
- ON/OFF Mode: Perform exactly like a single pole light switch. You can manually keep the light on or off. (Manual Override Mode)
10 Minute Quick Installation
The RZ020-5A-N series is designed for the US markets for single-pole applications. The 110V-277V voltage range works well in homes and offices and the 5A current rating is competent for daily uses.
RZ020-5A-N is a 4-wire switch and requires a neutral wire to work.
Wiring DiagramThe RZ020 motion sensor switch is hardwired and line-voltage powered. It requires a hot wire, load wire, and ground wire to function. The wiring is standard and the same as other switches.
- Connect black L wire with the live wire from the source
- Connect red L1 wire with the load wire to your light
- Connect green G wire with the ground wire
Exclusive ON/OFF Mode
The Best Of Both Worlds?Rayzeek introduces the exclusive ON/OFF mode, allowing users to permanently keep the load ON or OFF the same as a standard light switch. It’s so convenient that users can seamlessly switch between detection mode and manual mode with only one tap. Say goodbye to all these real-life headaches.
Pets Activate the Light at Night
Dogs and cats are active at night and might frequently trigger your motion light to turn on. That’s their nature. While most motion sensor switches do not have pet-immune features, false positives at night can be a real headache.
Select vacancy or OFF mode, especially in laundry rooms or the kitchen where your pets usually play around.
Take a Relaxing Long Bath
On average, people spend at least 8 minutes in the shower. When taking a relaxing bath at night, the light might unexpectedly turn off if the sensor can’t detect your presence in the bathing area. It can be an unpleasant experience that spoils the mood
Enter ON mode to keep the light always ON during the shower. Enjoy your hot and relaxing bath for as long as your like.
Lighting in Your Kids’ Bedroom
A vacancy sensor switch is used in bedrooms to reduce the electricity waste from the lighting left on by forgetful kids. Occupancy sensors aren’t suitable because they might activate the light at night, waking up kids, but it’s still handier in the daytime.
Now you can use occupancy sensor mode in your kid’s bedroom for the whole day. When it’s bedtime, touch the OFF button to keep the light off for the whole night.
Light False on in Empty Spaces
A fixed heat source(HVAC or hot wind) or even mirror reflection may send false positive IR signals that keep the light on when the space is unoccupied. Most of the time, it’s impossible to relocate the sensor’s position or the heat source as they’re fixed.
When the PIR sensor constantly detects signals and is falsely triggered, select OFF Mode to bypass motion detection
False off With People in the Room
Lights might falsely turn off if the sensor fails to detect the presence of people, e.g., the room is large, has obstacles blocking the IR signal, or fine motion activities such as reading or typing. It’s frustrating to repeatedly re-activate lights by moving your body.
When we need to permanently keep the light ON, enter ON mode by tapping the small button and exit without losing previous settings.
Features, Benefits, Specs
The ultimate energy-saving & lighting automation solution – switch from Auto ON/Auto OFF, Manal ON/Auto OFF, and Manal ON/Manual OFF operating mode for your multi-purpose rooms.
Features & Benefits
- Occupancy, Vacancy, Manual ON/OFF mode 3 in 1
- Exclusive ON/OFF mode allows the sensor switch to work the same as a standard light switch
- Time delay options: 15s, 1 min, 3 mins, 5 mins, 15 mins, 30 mins
- Enable ambient light sensor to keep lights off when there is ample natural light
- Low and high sensitivity adjustable
- Adjust settings by tapping buttons without removing the switch plate
- Magnetic latching relay provides better performance
- Made of fire-resistant materials for your safety
- RoHS, CE, FCC certified
Vacancy mode, Occupancy mode, Manual ON/OFF mode
15 s, 1 min (default), 3 mins, 5 mins, 15 mins, 30 mins
Off, 15 Lux, 25 Lux (default), 35 Lux
Low Sensitivity, High Sensitivity
- Working Conditions
110 VAC ~ 277 VAC
50 / 60Hz
1.2 m ~ 1.6 m
-20 ~ +40℃
- Detection Capability
7 m ~ 9 m (<27℃)
0.6 ~ 1.5m/s
- Bulb Compatibility
Fluorescent / Ballast / LED
550 W / 120 VAC, 800 W / 277 VAC
Incandescent / Halogen
550 W / 120 VAC
The Ideal Repalcement
US Standard SwitchRZ020 motion sensor switch fits in the “Single Gang” or “One Gang” electrical switch box and can replace standard light switches in the US market. Also suitable for countries using the US standard switch boxes:
- United States
- New Zealand
- Central America
Occupancy sensor with light sensor enabled is the ideal mode for bathroom usage, especially when you need to use it at night. Manual ON mode can be suitable for long showers.
Walk in and out of your home garage without the need to reach the light switch with an occupancy sensor switch. Enable daylight sensing to save more energy in the daytime.
Enjoy the automatic lighting turned on and off for you when arm-full with piles of laundry to wash or clean clothes to take away.
Place an occupancy sensor switch at the entrance and enjoy the automatic lighting while you’re busy cooking and preparing food for your family.
Occupancy/vacancy sensor switches can reduce the hours of lighting used by approximately 53% on dark hallways in your basement.
Occupancy sensors can reduce energy waste by 39% and increase energy-saving up to 17% with a 20-minute time delay for breakrooms.
Rayzeek motion sensor switches provide max flexibility for office use cases. Occurpnay, vacancy or manual mode, your office, your call.
Vacancy switch with manual override feature is perfect for conference rooms where it’s not frequently used and requires manual turn on and off for presentations.
RZ021 All-In-One Motion Sensor Switch
RZ021 User Guide
RZ021 Programming Guide
RZ021-G (No Neutral) – Installation Video
RZ021-N (Neutral Required) – Installation Video
Motion Sensor Light Switch FAQs
A motion sensor light switch is a motion-activated, touchless light switch that can automatically turn the light on and off for users. A motion sensor light switch is also called a motion sensor switch, light sensor switch, wall sensor switch, etc.
Motion sensor switches normally utilize three kinds of sensor technologies to detect moving objects: passive infrared(PIR) technology, ultrasonic technology, and dual-tech technology.
The PIR sensor passively detects the infrared beam emitted or reflected in the environment to look for temperature change as a motion signal. The ultrasonic sensors constantly emit and receive ultrasonic signals and detect the difference in the waves as a motion signal. The dual-tech technology combines both PIR and ultrasonic sensors for motion detection.
The PIR sensor technology is the most commonly used sensor technology for its durability, energy efficiency, and realibility. All Rayzeek motion sensor switches use all PIR sensors.
Occupancy mode, commonly referred to as occupancy sensor, is an auto-on and auto-off motion detection mode that will automatically turn on the light when the detecting area is occupied and automatically turn off the light when the room is vacant.
Vacancy mode, commonly referred to as vacancy sensor, is a manual-on and auto-off motion detection mode that requires the users to manually turn on the light by pressing the motion sensor switch and the sensor will automatically turn off the light when the room is vacant.
ON/OFF mode is an exclusive working mode Rayzeek introduced to make our motion sensor switch to be a perfect replacement for regular light switches. ON/OFF mode provides a permanent manual override to the sensor that makes the motion sensor light switch work exactly the same as a regular light switch.
You can enter the ON/OFF manual mode by pressing the small button. Simply press the small button again to switch from ON status and OFF status, just like how you operate a traditional light switch. Press the big button to exit ON/OFF mode and return to the previous occupancy or vacancy motion detection mode.
Light Sensor/Daylight Sensing
The light sensor or daylight sensing function allows a motion sensor to detect ambient brightness with an integrated photocell. When the light sensor is enabled, the motion sensor will not turn on the light when there is enough natural light to save electricity in the daytime. The default setting are OFF, 15 lux, 25 lux and 35 lux.
Time delay is the duration that keeps the light on after no motion is detected. The motion sensor switch turns off the light if the sensor cannot detect any valid motion signal during the time delay period. This time window can keep the lighting consistent and prevent the motion sensor from falsely turning off the light due to a temporary motion-detecting failure.
Sensor sensitivity is how far or how sensitive the motion sensor is able to detect a movement, especially a small motion. Users can choose the sensitivity that suits their needs for the best detecting performance. High sensitivity is not always good as it can be too sensitive, making the sensor to be able to detect people walking past the room, which might falsely turn on the light when no one is in the room.
Pets may trigger a motion sensor light switch. Animals also emit infrared beams into the environment that can be detected by a PIR sensor which can be seen as a valid motion signal.
Yes you can. Rayzeek motion sensor switch can replace 1-Gang switch without a problem. We offer both ground wire and neutral wire versions in case you don’t have a neutral wire available in the wall box.
No. Rayzeek sensor light switches are for single-pole use only.
Yes, you can. You can manually turn the light off anytime by either pressing the big button to temporarily turn it off or pressing the small button to enter OFF mode to permanently turn it off.
Yes, you can. Rayzeek exclusively offers a high current rating 10 Amp version for every high-load application like controlling fans and air conditioners.
Yes. Rayzeek motion sensor switches are residential and commercial applications compatible with a broad voltage range from 110V to 277V.