Qu'est-ce que le bouchon à baïonnette ?
Le bouchon à baïonnette, également connu sous le nom de BC, est un type de bouchon à baïonnette. culot de lampe. Il doit son nom à son design, qui ressemble à un raccord à baïonnette. Le bouchon à baïonnette a un diamètre de 22 mm (B22d) et se caractérise par un mécanisme de torsion et de verrouillage. Ce mécanisme comprend deux broches sur l'ampoule qui se rétractent puis se déploient dans des fentes à l'intérieur du raccord lorsqu'elles sont tordues, assurant ainsi une connexion sûre.
La coiffe à baïonnette se distingue de la coiffe à baïonnette Vis Edison (ES), qui utilise un filetage à vis au lieu de broches. Il est important de noter que le culot à baïonnette est le culot le plus couramment utilisé au Royaume-Uni. Il existe également des tailles plus petites, connues sous le nom de Small Bayonet Cap (SBC), d'un diamètre de 15 mm (B15d).
Vous êtes peut-être intéressé par
- Ceiling-mounted PIR occupancy sensor with dry-contact relay output
- 12/24VDC or 12/24VAC low-voltage supply
- COM, NO, and NC isolated relay contacts for EMS, HVAC, and building control inputs
- Low-voltage DC recessed ceiling-mounted microwave motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- 10A max work current with adjustable time delay, Lux threshold, and sensitivity
- Higher-load recessed ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Recessed ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Ceiling-mounted RZ037 PIR occupancy sensor dimmer for 220V power
- 3A maximum working current with 660W rated load
- LUX button controls light-sensor ON/OFF and user-set dimming brightness
- Ceiling-mounted RZ037 PIR occupancy sensor dimmer for 110V power
- 3A maximum working current with 330W rated load
- LUX button controls light-sensor ON/OFF and user-set dimming brightness
- Low-voltage DC ceiling-mounted microwave motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- 10A max work current with adjustable time delay, Lux threshold, and sensitivity
- Higher-load ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Low-voltage DC recessed ceiling mount PIR motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- Max work current 10A with adjustable time delay, Lux threshold, and sensitivity
- Higher-load recessed ceiling mount PIR motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 360-degree detection with adjustable time delay, Lux threshold, and sensitivity
- Recessed ceiling mount PIR motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 360-degree detection with adjustable time delay, Lux threshold, and sensitivity
- Wireless switch and receiver kit for indoor ON/OFF lighting control
- 100-230VAC, 50/60Hz receiver with 5A rated current
- CR2032-powered wireless switch with 2.4GHz communication
- Présence (Auto-ON/Auto-OFF)
- 12–24V DC (10–30VDC), jusqu’à 10A
- Couverture à 360°, diamètre de 8–12 m
- Délai d’attente 15 s–30 min
- Capteur de lumière Désactivé/15/25/35 Lux
- Sensibilité Haute/Basse
- Mode d'occupation Auto-ON/Auto-OFF
- 100–265V AC, 10A (nécessite un neutre)
- Couverture à 360° ; diamètre de détection de 8 à 12 m
- Délai d'attente 15 s–30 min ; Lux ARRÊT/15/25/35 ; Sensibilité Haute/Basse
- Mode d'occupation Auto-ON/Auto-OFF
- 100–265V CA, 5A (neutre requis)
- Couverture à 360° ; diamètre de détection de 8 à 12 m
- Délai d'attente 15 s–30 min ; Lux ARRÊT/15/25/35 ; Sensibilité Haute/Basse
- 100V-230VAC
- Portée de transmission : jusqu’à 20m
- Capteur de mouvement sans fil
- Contrôle filaire
- Tension : 2 piles AAA/5 V CC (micro USB)
- Mode jour/nuit
- Délai de temporisation : 15min, 30min, 1h (par défaut), 2h
- Adaptateur secteur à prise européenne
- Adaptateur secteur à prise britannique