自然光とは
自然光は、太陽光による照度を忠実に再現した照明である。ケルビン温度は約5,000ケルビン、演色評価数(CRI)は100である。また ケルビン温度 自然光は一日を通して変化し、時間帯や雲量などの要因によって、通常5,000~6,000ケルビンの範囲にある。CRIは、光源が自然の太陽光と比較してどの程度正確に色を表現するかを表す指標です。照明光源が自然光として分類されるためには、一般的にCRIが90以上であることが適切であると考えられている。
何をもって自然照明とするかについては、各社独自の解釈を持っている場合もあるが、色温度が6,500ケルビン、CRIが82~84のランプは自然照明の基準を満たさないというのが一般的な見解である。同様に、色温度が4,100ケルビンでCRIが高いランプも、光の色が太陽光から大きく逸脱しており、太陽光とは似ても似つかないため、自然光源とはみなされない。
多分、あなたは興味がある
- Ceiling-mounted PIR occupancy sensor with dry-contact relay output
- 12/24VDC or 12/24VAC low-voltage supply
- COM, NO, and NC isolated relay contacts for EMS, HVAC, and building control inputs
- Low-voltage DC recessed ceiling-mounted microwave motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- 10A max work current with adjustable time delay, Lux threshold, and sensitivity
- Higher-load recessed ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Recessed ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Ceiling-mounted RZ037 PIR occupancy sensor dimmer for 220V power
- 3A maximum working current with 660W rated load
- LUX button controls light-sensor ON/OFF and user-set dimming brightness
- Ceiling-mounted RZ037 PIR occupancy sensor dimmer for 110V power
- 3A maximum working current with 330W rated load
- LUX button controls light-sensor ON/OFF and user-set dimming brightness
- Low-voltage DC ceiling-mounted microwave motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- 10A max work current with adjustable time delay, Lux threshold, and sensitivity
- Higher-load ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Low-voltage DC recessed ceiling mount PIR motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- Max work current 10A with adjustable time delay, Lux threshold, and sensitivity
- Higher-load recessed ceiling mount PIR motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 360-degree detection with adjustable time delay, Lux threshold, and sensitivity
- Recessed ceiling mount PIR motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 360-degree detection with adjustable time delay, Lux threshold, and sensitivity
- Wireless switch and receiver kit for indoor ON/OFF lighting control
- 100-230VAC, 50/60Hz receiver with 5A rated current
- CR2032-powered wireless switch with 2.4GHz communication
- 占有(オートオン/オートオフ)
- 12–24V DC(10–30VDC)、最大10A
- 360°カバレッジ、8–12m直径
- 遅延時間 15秒~30分
- 光センサー オフ/15/25/35ルクス
- 高/低感度
- 自動ON/自動OFF占有モード
- 100–265V AC、10A(ニュートラル必要)
- 360°カバレッジ; 検出直径8–12 m
- タイム遅延15秒〜30分; Lux OFF/15/25/35; 感度 高/低
- 自動ON/自動OFF占有モード
- 100–265V AC、5A(中性線必要)
- 360°カバレッジ; 検出直径8–12 m
- タイム遅延15秒〜30分; Lux OFF/15/25/35; 感度 高/低
- 電圧:単4電池2本 / 5V DC (Micro USB)
- デイ/ナイト・モード
- 遅延時間15分、30分、1時間(デフォルト)、2時間


















