RZ038 recessed ceiling PIR motion sensor front view

RZ038-5A 360-Degree Recessed Ceiling PIR Motion Sensor Switch

Name: RZ038-5A 360-Degree Recessed Ceiling PIR Motion Sensor Switch
Brand: Rayzeek
SKU: RZ038-5A
Price: 15 USD
Availability: InStock

RZ038-5A

$15.00

उत्पाद की मुख्य विशेषताएं

5A AC model: 100-265 VAC recessed ceiling sensor switch for verified RZ038-5A load ratings.
Ceiling PIR coverage: 360-degree detection with 8-12 m detection diameter under manual conditions.
Installer setup: Push-button settings for time delay, Lux threshold, and high/low sensitivity.

आप जो खोज रहे हैं वह नहीं है? हमारा पोर्टफोलियो देखें:

किसी विशेषज्ञ से सलाह लें

शीघ्र डिलीवरी: स्टॉक में 99%

पूर्ण गति-सक्रिय उत्पाद लाइन

पूछताछ करें थोक ODM/OEM ऑर्डर के लिए

Recessed 5A Ceiling Control For Everyday Lighting Loads

The RZ038-5A is a recessed ceiling-mounted PIR motion sensor switch for automatic lighting control where a discreet ceiling sensor is preferred over a wall switch.

It connects to 100-265 VAC circuits with live, neutral, and load wiring, giving installers adjustable time delay, Lux level, and sensitivity in a compact spring-clip ceiling form.

RZ038 daylight sensor lux adjustment in bathroom lighting application

Lux Control For Rooms With Changing Daylight

The built-in light sensor can hold lighting off when ambient light is above the selected threshold, helping the sensor respond to motion only when the room needs light.

Use the Off, 15 Lux, 25 Lux, or 35 Lux setting to match bathrooms, utility rooms, hallways, or other indoor areas where daylight and occupancy change during the day.

विशेषताएं, लाभ, विनिर्देश

The RZ038-5A combines 360-degree PIR detection, 100-265 VAC wiring, and verified 5A load ratings so installers can check coverage, setup, and lighting compatibility before ordering.

RZ038 AC line voltage wiring and spring clip installation diagram

विशेषताएं और लाभ

5A line-voltage control: Supports 100-265 VAC lighting circuits with the source-backed RZ038-5A load ratings shown in the specifications.
360-degree PIR detection: Ceiling placement gives broad room coverage with an 8-12 m detection diameter when installed within the manual conditions.
समायोज्य समय विलंब: Choose 15 s, 30 s, 1 min, 3 min, 5 min, 10 min, or 30 min to match the room traffic pattern.
Selectable Lux threshold: Set Off, 15 Lux, 25 Lux, or 35 Lux to control whether motion can switch lights on when ambient light is present.
High/low sensitivity: The SENS button lets installers tune detection response for the room layout.
Spring clip or screw mounting: Mount into an 82-90 mm ceiling cutout or secure to a ceiling/junction box using the documented methods.

विशेषताएँ

मॉडल

RZ038-5A

उत्पाद प्रकार

Recessed ceiling mount PIR motion sensor switch

सेंसर प्रकार

पैसिव इंफ्रारेड (PIR)

समय विलंब

15 सेकंड, 30 सेकंड, 1 मिनट (डिफ़ॉल्ट), 3 मिनट, 5 मिनट, 10 मिनट, 30 मिनट

Light sensor level

बंद, 15 लक्स, 25 लक्स (डिफ़ॉल्ट), 35 लक्स

संवेदनशीलता

High or Low

Power-up behavior

1-minute warm-up after power is turned on or restored

Electrical

बिजली का स्रोत

100 VAC ~ 265 VAC

बिजली आवृत्ति

50/60 Hz

वायरिंग

White to Neutral; Red to Load; Black to Live

Incandescent / Halogen load

500 W / 110 VAC; 1100 W / 220 VAC

Fluorescent / Ballast / LED load

250 W / 110 VAC; 500 W / 220 VAC

Detection & Installation

खनन व्यास

8-12 m when ambient temperature is below 27 C

पहचान रेंज

360-degree ceiling coverage

Motion detection speed

0.6-1.5 m/s

स्थापना ऊंचाई

2.5-3.5 m

काम करने का तापमान

-10 to +40 C

काम करने की आर्द्रता

< 93% RH

Ceiling cutout

82-90 mm circular hole for spring clip mounting

Face diameter

106 mm

सामान्य प्रश्न

Does the RZ038-5A need a neutral wire?

Yes. The AC wiring diagram requires White to Neutral, Red to Load, and Black to Live.

What loads can the 5A model control?

The manual lists 500 W / 110 VAC and 1100 W / 220 VAC for incandescent or halogen loads, and 250 W / 110 VAC and 500 W / 220 VAC for fluorescent, ballast, or LED loads.

Can the sensor keep lights off during bright daylight?

Yes. The Lux button can set Off, 15 Lux, 25 Lux, or 35 Lux, so the light sensor threshold can be matched to the room.

Where should this ceiling sensor be installed?

The manual recommends a 2.5-3.5 m installation height and advises avoiding heat sources, forced air, ventilation systems, ceiling fans, and hanging light fixtures near the sensor.