RZ048-5A 360-Degree Recessed Ceiling Microwave Motion Sensor Switch
RZ048-5A is a 100-265 VAC recessed ceiling microwave motion sensor switch for automatic indoor lighting control.
The 5A model uses high-frequency microwave Doppler sensing, neutral-required AC wiring, adjustable time delay, selectable Lux threshold, and high/low sensitivity in the RZ048 recessed ceiling form.
- 100-265 VAC line-voltage input, 5A model
- 5.8 GHz microwave sensing with 360-degree coverage
- 8-12 m detection diameter under manual conditions
- Time delay: 15 s to 30 min
- Lux setting: Off, 15, 25, or 35 Lux
Points forts du produit
- 5A AC model: 100-265 VAC recessed ceiling microwave sensor switch for verified RZ048-5A load ratings.
- Microwave sensing: 5.8 GHz Doppler detection with 360-degree ceiling coverage.
- Recessed mounting: Screw mount or spring clip mount with an 82-90 mm circular ceiling cutout.
Ce n'est pas ce que vous recherchez ? Voir notre portefeuille :
Consulter un expert
Livraison rapide : 99% en stock
Gamme complète de produits activés par le mouvement
Demande de renseignements pour les commandes en gros ODM/OEM
5A Recessed Ceiling Microwave Sensing For Automatic Lighting
The RZ048-5A is a recessed ceiling-mounted microwave motion sensor switch for indoor automatic lighting control where a low-profile ceiling form is preferred over a wall switch.
It uses 100-265 VAC live, neutral, and load wiring, with push-button adjustment for time delay, Lux threshold, and high/low sensitivity after installation.
360-Degree Microwave Coverage For Everyday Rooms
Microwave Doppler sensing can detect movement through many non-metal materials such as glass, plastic, and thin partitions, which helps ceiling placement cover practical indoor room layouts.
Because that same sensitivity can also detect movement outside the intended area, installers should reduce sensitivity or relocate the sensor when doors, windows, partitions, metal surfaces, or moving fixtures cause nuisance triggering.
Caractéristiques, avantages, spécifications
The RZ048-5A combines 5A AC lighting control, recessed mounting, and 5.8 GHz microwave detection so installers can verify load fit, placement, and setup before ordering.
Caractéristiques et avantages
- 5A line-voltage control: Supports 100-265 VAC lighting circuits with the source-backed RZ048-5A load ratings shown in the specifications.
- 5.8 GHz microwave sensing: High-frequency Doppler detection actively senses movement for ceiling-mounted automatic lighting control.
- Recessed ceiling form: Screw mount or spring clip mounting supports a low-profile ceiling installation with the documented 82-90 mm cutout.
- 360-degree ceiling coverage: Ceiling placement gives broad room coverage with an 8-12 m detection diameter under manual conditions.
- Non-metal material penetration: Microwave detection can pass through many plastics, glass, and thin partitions, while metal blocks detection.
- Adjustable time delay: Choose 15 s, 30 s, 1 min, 3 min, 5 min, 10 min, or 30 min to match room traffic patterns.
- Selectable Lux threshold: Set Off, 15 Lux, 25 Lux, or 35 Lux so the load responds to motion only when the ambient-light condition fits the installation.
- Caractéristiques
-
Model
RZ048-5A
Product type
Recessed ceiling-mounted microwave motion sensor switch
Sensor type
High-frequency microwave Doppler (HF)
Microwave frequency
5.8 GHz ISM band
Transmission power
0.4 mW
Délai
15 s, 30 s, 1 min (par défaut), 3 min, 5 min, 10 min, 30 min
Light sensor level
Arrêt, 15 Lux, 25 Lux (par défaut), 35 Lux
Sensibilité
High or Low
Material penetration
Detects through most plastics, glass, and thin partitions; metal blocks detection
- Electrical
-
Source d'alimentation
100 VAC ~ 265 VAC
Power frequency
50/60 Hz
Câblage
White to Neutral; Red to Load; Black to Live
Consommation électrique
0.5 W or less standby; 1 W operation
Incandescent / Halogen load
500 W / 110 VAC ; 1100 W / 220 VAC
Fluorescent / Ballast / LED load
250 W / 110 VAC ; 500 W / 220 VAC
- Detection & Installation
-
Detection diameter
8-12 m
Detection range
360-degree ceiling coverage
Installation height
2.5-5 m
Working temperature
-10 to +40 C
Working humidity
< 93% RH non-condensing
Mounting methods
Screw mount or spring clip mount
Ceiling cutout
82-90 mm circular hole for spring clip mounting
Face diameter
106 mm
Body diameter
78 mm
Height
64 mm overall; 25 mm lower visible section
Metal clearance
Keep at least 1 m from large metal or highly reflective surfaces; do not fully enclose in metal
Installation notes
Avoid windows, doors, automatic doors, rotating equipment, HVAC airflow, fans, moving machinery, vibrating fixtures, and direct view to public corridors or outdoor areas
FAQ
How is the RZ048-5A different from a PIR ceiling sensor?
RZ048 uses high-frequency microwave Doppler sensing. It can detect through many non-metal materials such as glass, plastic, and thin partitions, while metal blocks detection.
Does the RZ048-5A need a neutral wire?
Yes. The AC wiring diagram requires White to Neutral, Red to Load, and Black to Live.
What loads can the 5A model control?
The manual lists 500 W / 110 VAC and 1100 W / 220 VAC for incandescent or halogen loads, and 250 W / 110 VAC and 500 W / 220 VAC for fluorescent, ballast, or LED loads.
What ceiling opening does the spring clip mount need?
The manual lists an 82-90 mm circular ceiling hole for spring clip mounting.
Can microwave sensing trigger from outside the room?
Yes. The manual warns that microwave sensing can detect through glass, doors, or partitions, so sensitivity should be reduced or the sensor relocated if nuisance detection occurs.
Where should the RZ048 be installed?
The manual lists a 2.5-5 m installation height and recommends avoiding windows, doors, automatic doors, rotating equipment, HVAC airflow, fans, moving machinery, vibrating fixtures, and large metal surfaces.
Avis
Il n’y a pas encore d’avis.