평균 루멘이란?
평균 루멘, 또한 디자인 루멘는 램프가 전체 수명 동안 생성하는 평균 광 출력을 설명하는 데 사용되는 용어입니다. 정격 수명. 이는 조명 장치가 수명 동안 방출하는 평균 빛의 양을 측정하는 역할을 합니다. 평균 루멘의 개념은 램프의 성능과 효율성을 이해하는 데 매우 중요합니다. 램프는 작동함에 따라 시간이 지남에 따라 광 출력이 감소하는 경향이 있습니다. 램프의 평균 루멘 값을 알면 사용자는 조명 투자에 대해 정보에 입각한 결정을 내릴 수 있습니다.
평균 루멘 값은 형광등의 경우 전구 정격 수명의 40퍼센트로 계산됩니다. 즉, 형광등의 평균 광도는 총 정격 수명의 40% 이상의 성능을 고려하여 결정됩니다. 또한 다음과 같은 일부 램프는 T5 램프는 매우 효율적이며 수명이 다한 후에도 초기 광 출력의 상당 부분을 유지할 수 있습니다. 즉, 이러한 램프는 시간이 지남에 따라 광 출력의 감가상각이 최소화되므로 비용 효율적인 옵션입니다.
관심 있는 분야
- Ceiling-mounted PIR occupancy sensor with dry-contact relay output
- 12/24VDC or 12/24VAC low-voltage supply
- COM, NO, and NC isolated relay contacts for EMS, HVAC, and building control inputs
- Low-voltage DC recessed ceiling-mounted microwave motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- 10A max work current with adjustable time delay, Lux threshold, and sensitivity
- Higher-load recessed ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Recessed ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Ceiling-mounted RZ037 PIR occupancy sensor dimmer for 220V power
- 3A maximum working current with 660W rated load
- LUX button controls light-sensor ON/OFF and user-set dimming brightness
- Ceiling-mounted RZ037 PIR occupancy sensor dimmer for 110V power
- 3A maximum working current with 330W rated load
- LUX button controls light-sensor ON/OFF and user-set dimming brightness
- Low-voltage DC ceiling-mounted microwave motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- 10A max work current with adjustable time delay, Lux threshold, and sensitivity
- Higher-load ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Low-voltage DC recessed ceiling mount PIR motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- Max work current 10A with adjustable time delay, Lux threshold, and sensitivity
- Higher-load recessed ceiling mount PIR motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 360-degree detection with adjustable time delay, Lux threshold, and sensitivity
- Recessed ceiling mount PIR motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 360-degree detection with adjustable time delay, Lux threshold, and sensitivity
- Wireless switch and receiver kit for indoor ON/OFF lighting control
- 100-230VAC, 50/60Hz receiver with 5A rated current
- CR2032-powered wireless switch with 2.4GHz communication
- 점유 (자동-켜기/자동-끄기)
- 12–24V DC (10–30VDC), 최대 10A
- 360° 커버리지, 직경 8–12 m
- 시간 지연 15초–30분
- 빛 센서 끄기/15/25/35 Lux
- 고/저 감도
- 자동 켜기/자동 끄기 점유 모드
- 100–265V AC, 10A (중성선 필요)
- 360° 커버리지; 8–12 m 감지 직경
- 시간 지연 15초–30분; Lux OFF/15/25/35; 감도 높음/낮음
- 자동 켜기/자동 끄기 점유 모드
- 100–265V AC, 5A (중성선 필요)
- 360° 커버리지; 8–12 m 감지 직경
- 시간 지연 15초–30분; Lux OFF/15/25/35; 감도 높음/낮음
- 100V-230VAC
- 전송 거리: 최대 20m
- 무선 동작 감지기
- 유선 제어
- 전압: 2x AAA 배터리 / 5V DC (Micro USB)
- 주간/야간 모드
- 시간 지연: 15분, 30분, 1시간(기본값), 2시간
자주 묻는 질문
방의 적절한 루멘 양을 결정하려면 방의 면적을 계산한 다음 여기에 권장 풋캔들 요구량을 곱해야 합니다. 예를 들어, 일반적으로 10~20개의 풋캔들이 필요한 100제곱피트 크기의 거실에는 약 1,000~2,000루멘이 필요합니다. 마찬가지로, 같은 크기이지만 30~40개의 풋 캔들이 필요한 식당의 경우 약 3,000~4,000루멘이 필요합니다.
와트와 루멘은 직접적인 관련이 없습니다. 일반적으로 와트 수가 높은 전구가 더 많은 루멘을 방출하는 것은 사실이지만, 전구 효율의 차이로 인해 동일한 와트 수의 LED 전구 간에도 루멘의 양은 다를 수 있습니다.
총 루멘 출력 범위는 2000에서 4000 사이를 사용하는 것이 좋습니다.