什么是电磁镇流器
电磁镇流器是一种用于照明灯具,尤其是荧光灯的装置。它根据电磁学原理工作,电流通过导线时会产生磁场。电磁镇流器又称磁镇流器或扼流圈,由一个铜线线圈组成。线圈产生的磁场可以控制流向荧光灯的电流。铜线的粗细和长度决定了通过的电流大小。
电磁镇流器 会导致 颤巍巍 或产生嗡嗡声。这是由于镇流器引起的电流波动造成的。与电子镇流器相比,电磁镇流器被认为不够先进。某些型号的电磁镇流器需要使用启动器(一个充满气体的圆筒状小部件)来启动照明。这种启动方法被称为 预热方法.
也许您感兴趣的是
- Ceiling-mounted PIR occupancy sensor with dry-contact relay output
- 12/24VDC or 12/24VAC low-voltage supply
- COM, NO, and NC isolated relay contacts for EMS, HVAC, and building control inputs
- Low-voltage DC recessed ceiling-mounted microwave motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- 10A max work current with adjustable time delay, Lux threshold, and sensitivity
- Higher-load recessed ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Recessed ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Ceiling-mounted RZ037 PIR occupancy sensor dimmer for 220V power
- 3A maximum working current with 660W rated load
- LUX button controls light-sensor ON/OFF and user-set dimming brightness
- Ceiling-mounted RZ037 PIR occupancy sensor dimmer for 110V power
- 3A maximum working current with 330W rated load
- LUX button controls light-sensor ON/OFF and user-set dimming brightness
- Low-voltage DC ceiling-mounted microwave motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- 10A max work current with adjustable time delay, Lux threshold, and sensitivity
- Higher-load ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Low-voltage DC recessed ceiling mount PIR motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- Max work current 10A with adjustable time delay, Lux threshold, and sensitivity
- Higher-load recessed ceiling mount PIR motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 360-degree detection with adjustable time delay, Lux threshold, and sensitivity
- Recessed ceiling mount PIR motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 360-degree detection with adjustable time delay, Lux threshold, and sensitivity
- Wireless switch and receiver kit for indoor ON/OFF lighting control
- 100-230VAC, 50/60Hz receiver with 5A rated current
- CR2032-powered wireless switch with 2.4GHz communication
- 占用(自動開/自動關)
- 12–24V 直流(10–30VDC),最大 10A
- 360° 覆蓋範圍,直徑 8–12 米
- 延遲時間 15 秒–30 分鐘
- 光感測器關/15/25/35 Lux
- 高/低感度
- 自动开启/自动关闭占用模式
- 100–265V交流,10A(需要中性線)
- 360° 覆蓋範圍;8–12 米探測直徑
- 時間延遲 15 秒–30 分鐘;Lux OFF/15/25/35;感度 高/低
- 自动开启/自动关闭占用模式
- 100–265V AC,5A(需要中性線)
- 360° 覆蓋範圍;8–12 米探測直徑
- 時間延遲 15 秒–30 分鐘;Lux OFF/15/25/35;感度 高/低


















