리프랙트란?
프리즘 굴절 렌즈는 빛을 균일하게 분배하기 위해 프리즘 굴절 렌즈를 사용하는 일종의 고정 장치입니다. 이 렌즈는 빛의 경로를 조작하여 빛이 주어진 영역에 균일하게 퍼지도록 설계되었습니다. 예를 들어 가로등 조명기구에 굴절 렌즈를 사용하는 목적은 빛을 보다 균일하고 효율적으로 분배하여 눈부심을 줄이고 가시성을 개선하는 것입니다.
가로등 조명기구에 프리즘 굴절 렌즈를 사용하면 방출되는 빛의 방향과 강도를 제어하는 데 도움이 됩니다. 빛의 경로를 조작함으로써 굴절 렌즈는 다음과 같은 이점을 제공합니다. 빛 공해 최소화 가장 필요한 곳에 조명을 비출 수 있도록 합니다. 이는 다음을 제공해야 하는 실외 조명 애플리케이션에서 특히 중요할 수 있습니다. 적절한 조명 주변 환경에 미치는 부정적인 영향을 최소화합니다.
관심 있는 분야
- Ceiling-mounted PIR occupancy sensor with dry-contact relay output
- 12/24VDC or 12/24VAC low-voltage supply
- COM, NO, and NC isolated relay contacts for EMS, HVAC, and building control inputs
- Low-voltage DC recessed ceiling-mounted microwave motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- 10A max work current with adjustable time delay, Lux threshold, and sensitivity
- Higher-load recessed ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Recessed ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Ceiling-mounted RZ037 PIR occupancy sensor dimmer for 220V power
- 3A maximum working current with 660W rated load
- LUX button controls light-sensor ON/OFF and user-set dimming brightness
- Ceiling-mounted RZ037 PIR occupancy sensor dimmer for 110V power
- 3A maximum working current with 330W rated load
- LUX button controls light-sensor ON/OFF and user-set dimming brightness
- Low-voltage DC ceiling-mounted microwave motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- 10A max work current with adjustable time delay, Lux threshold, and sensitivity
- Higher-load ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Low-voltage DC recessed ceiling mount PIR motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- Max work current 10A with adjustable time delay, Lux threshold, and sensitivity
- Higher-load recessed ceiling mount PIR motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 360-degree detection with adjustable time delay, Lux threshold, and sensitivity
- Recessed ceiling mount PIR motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 360-degree detection with adjustable time delay, Lux threshold, and sensitivity
- Wireless switch and receiver kit for indoor ON/OFF lighting control
- 100-230VAC, 50/60Hz receiver with 5A rated current
- CR2032-powered wireless switch with 2.4GHz communication
- 점유 (자동-켜기/자동-끄기)
- 12–24V DC (10–30VDC), 최대 10A
- 360° 커버리지, 직경 8–12 m
- 시간 지연 15초–30분
- 빛 센서 끄기/15/25/35 Lux
- 고/저 감도
- 자동 켜기/자동 끄기 점유 모드
- 100–265V AC, 10A (중성선 필요)
- 360° 커버리지; 8–12 m 감지 직경
- 시간 지연 15초–30분; Lux OFF/15/25/35; 감도 높음/낮음
- 자동 켜기/자동 끄기 점유 모드
- 100–265V AC, 5A (중성선 필요)
- 360° 커버리지; 8–12 m 감지 직경
- 시간 지연 15초–30분; Lux OFF/15/25/35; 감도 높음/낮음
- 전압: 2x AAA 배터리 / 5V DC (Micro USB)
- 주간/야간 모드
- 시간 지연: 15분, 30분, 1시간(기본값), 2시간
프리즘 굴절 렌즈 외에도 가로등 조명기구에는 다이캐스트 알루미늄 하우징 및 다양한 마운팅 구성과 같은 다른 구성 요소가 포함될 수 있습니다. 이러한 기능은 조명기구의 전반적인 기능과 다용도성에 기여하여 다양한 환경에 맞게 쉽게 설치하고 조정할 수 있습니다. 조명 요구 사항.


















