투명 머티리얼이란?
투명 소재는 빛이 방해나 산란을 최소화하면서 통과할 수 있는 물질입니다. 투명 소재는 투명하고 투명한 성질을 가지고 있어 반대편에 있는 물체를 선명하게 볼 수 있는 것이 특징입니다. 투명 소재는 통과하는 빛의 색을 투과하므로 반사되는 빛은 입사되는 빛과 같은 색을 띠게 됩니다. 주어진 맥락에서 언급된 투명 재료의 예로는 공기, 물, 투명 유리 등이 있습니다.
와 달리 반투명 소재는 일부 빛은 통과시키지만 산란시키는 반면, 투명 소재는 빛이 크게 확산되거나 왜곡되지 않고 통과할 수 있습니다. 이러한 특성 덕분에 투명 머티리얼은 다음과 같은 구성에 사용하기에 이상적입니다. 조명 설비렌즈나 커버와 같이 방출된 빛이 방해받지 않고 통과할 수 있도록 하는 장치입니다.
동작 인식 에너지 절약 솔루션을 찾고 계신가요?
전체 PIR 모션 센서, 모션 인식 에너지 절약 제품, 모션 센서 스위치, 재실/공실 상업용 솔루션에 대해 문의하세요.
투명 소재는 다음과 같은 차이점이 있다는 점을 언급하는 것이 중요합니다. 불투명 재질는 빛을 통과시키지 못합니다. 불투명한 소재는 빛을 반사하거나 흡수하여 열로 변환합니다. 반면 투명한 소재는 닿는 빛의 대부분을 투과하여 반대편에 있는 물체를 선명하게 볼 수 있습니다.
관심 있는 분야
- Ceiling-mounted PIR occupancy sensor with dry-contact relay output
- 12/24VDC or 12/24VAC low-voltage supply
- COM, NO, and NC isolated relay contacts for EMS, HVAC, and building control inputs
- Low-voltage DC recessed ceiling-mounted microwave motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- 10A max work current with adjustable time delay, Lux threshold, and sensitivity
- Higher-load recessed ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Recessed ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Ceiling-mounted RZ037 PIR occupancy sensor dimmer for 220V power
- 3A maximum working current with 660W rated load
- LUX button controls light-sensor ON/OFF and user-set dimming brightness
- Ceiling-mounted RZ037 PIR occupancy sensor dimmer for 110V power
- 3A maximum working current with 330W rated load
- LUX button controls light-sensor ON/OFF and user-set dimming brightness
- Low-voltage DC ceiling-mounted microwave motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- 10A max work current with adjustable time delay, Lux threshold, and sensitivity
- Higher-load ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Low-voltage DC recessed ceiling mount PIR motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- Max work current 10A with adjustable time delay, Lux threshold, and sensitivity
- Higher-load recessed ceiling mount PIR motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 360-degree detection with adjustable time delay, Lux threshold, and sensitivity
- Recessed ceiling mount PIR motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 360-degree detection with adjustable time delay, Lux threshold, and sensitivity
- Wireless switch and receiver kit for indoor ON/OFF lighting control
- 100-230VAC, 50/60Hz receiver with 5A rated current
- CR2032-powered wireless switch with 2.4GHz communication
- 점유 (자동-켜기/자동-끄기)
- 12–24V DC (10–30VDC), 최대 10A
- 360° 커버리지, 직경 8–12 m
- 시간 지연 15초–30분
- 빛 센서 끄기/15/25/35 Lux
- 고/저 감도
- 자동 켜기/자동 끄기 점유 모드
- 100–265V AC, 10A (중성선 필요)
- 360° 커버리지; 8–12 m 감지 직경
- 시간 지연 15초–30분; Lux OFF/15/25/35; 감도 높음/낮음
- 자동 켜기/자동 끄기 점유 모드
- 100–265V AC, 5A (중성선 필요)
- 360° 커버리지; 8–12 m 감지 직경
- 시간 지연 15초–30분; Lux OFF/15/25/35; 감도 높음/낮음
- 100V-230VAC
- 전송 거리: 최대 20m
- 무선 동작 감지기
- 유선 제어
- 전압: 2x AAA 배터리 / 5V DC (Micro USB)
- 주간/야간 모드
- 시간 지연: 15분, 30분, 1시간(기본값), 2시간
자주 묻는 질문
물이나 유리와 같은 투명한 물체는 빛이 쉽게 통과할 수 있습니다. 반면 트레이싱 페이퍼나 왁스 칠한 종이와 같은 반투명 물체는 빛이 부분적으로만 통과할 수 있습니다.
반투명 물체는 빛을 방출하지 않습니다. 반투명 물체는 대부분의 빛을 투과하는 투명한 물체와 달리 반사, 흡수, 투과라는 세 가지 과정을 모두 거칩니다.
투명한 물질은 광선을 산란시키지 않고 빛이 통과할 수 있도록 합니다. 즉, 투명한 물체에 빛이 떨어지면 빛의 대부분이 통과하여 물체를 투과하여 볼 수 있습니다. 투명한 물질이나 물체는 외관이 선명합니다.
투명 물질과 반투명 물질 모두 빛이 통과할 수 있습니다. 투명한 물질의 예로는 안경, 유리, 모래 타이머, 프리즘, 어항, 카메라 렌즈 등이 있습니다. 투명한 매체는 빛이 완전히 통과하는 반면 반투명 물체는 빛이 부분적으로만 통과합니다.