스페큘러 표면이란?
스페큘러 표면은 매끄럽고 거울과 같은 표면으로, 다음과 같은 특징을 나타냅니다. 정반사. 정반사는 표면 반사의 한 유형으로, 평행한 광선이 같은 각도로 표면에서 반사되어 선명하고 집중된 반사를 만들어냅니다. 이 현상은 종종 욕실 거울에서 관찰되는 반사나 잔잔한 수면에 반사되는 것과 비교됩니다.
레이직 모션 센서 포트폴리오에서 영감을 얻으세요.
원하는 것을 찾지 못하셨나요? 걱정하지 마세요. 문제를 해결할 수 있는 다른 방법은 항상 있습니다. 저희 포트폴리오 중 하나가 도움이 될 수 있습니다.
스페큘러 표면은 산란이나 확산을 최소화하면서 빛을 고도로 방향성 있게 반사하는 기능이 특징입니다. 일반적으로 거울, 광택이 나는 금속, 유리, 플라스틱 또는 투명한 액체 표면과 같은 재질과 관련이 있습니다. 스페큘러 반사를 구현하려면 표면의 불규칙성이 광선의 방사 길이보다 작아야 합니다.
정반사 는 자연보다는 인공 공간에서 더 흔히 관찰됩니다. 그러나 고요한 물은 이러한 유형의 반사를 만들어내는 자연의 능력을 보여주는 예가 될 수 있습니다.
관심 있는 분야
- Ceiling-mounted PIR occupancy sensor with dry-contact relay output
- 12/24VDC or 12/24VAC low-voltage supply
- COM, NO, and NC isolated relay contacts for EMS, HVAC, and building control inputs
- Low-voltage DC recessed ceiling-mounted microwave motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- 10A max work current with adjustable time delay, Lux threshold, and sensitivity
- Higher-load recessed ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Recessed ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Ceiling-mounted RZ037 PIR occupancy sensor dimmer for 220V power
- 3A maximum working current with 660W rated load
- LUX button controls light-sensor ON/OFF and user-set dimming brightness
- Ceiling-mounted RZ037 PIR occupancy sensor dimmer for 110V power
- 3A maximum working current with 330W rated load
- LUX button controls light-sensor ON/OFF and user-set dimming brightness
- Low-voltage DC ceiling-mounted microwave motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- 10A max work current with adjustable time delay, Lux threshold, and sensitivity
- Higher-load ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Ceiling-mounted microwave motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 5.8 GHz microwave sensing with adjustable time delay, Lux threshold, and sensitivity
- Low-voltage DC recessed ceiling mount PIR motion sensor switch
- 12 VDC / 24 VDC input with 10-30 VDC range
- Max work current 10A with adjustable time delay, Lux threshold, and sensitivity
- Higher-load recessed ceiling mount PIR motion sensor switch
- 100-265 VAC line-voltage input, 10A model
- 360-degree detection with adjustable time delay, Lux threshold, and sensitivity
- Recessed ceiling mount PIR motion sensor switch
- 100-265 VAC line-voltage input, 5A model
- 360-degree detection with adjustable time delay, Lux threshold, and sensitivity
- Wireless switch and receiver kit for indoor ON/OFF lighting control
- 100-230VAC, 50/60Hz receiver with 5A rated current
- CR2032-powered wireless switch with 2.4GHz communication
- 점유 (자동-켜기/자동-끄기)
- 12–24V DC (10–30VDC), 최대 10A
- 360° 커버리지, 직경 8–12 m
- 시간 지연 15초–30분
- 빛 센서 끄기/15/25/35 Lux
- 고/저 감도
- 자동 켜기/자동 끄기 점유 모드
- 100–265V AC, 10A (중성선 필요)
- 360° 커버리지; 8–12 m 감지 직경
- 시간 지연 15초–30분; Lux OFF/15/25/35; 감도 높음/낮음
- 자동 켜기/자동 끄기 점유 모드
- 100–265V AC, 5A (중성선 필요)
- 360° 커버리지; 8–12 m 감지 직경
- 시간 지연 15초–30분; Lux OFF/15/25/35; 감도 높음/낮음
- 전압: 2x AAA 배터리 / 5V DC (Micro USB)
- 주간/야간 모드
- 시간 지연: 15분, 30분, 1시간(기본값), 2시간


















